LCD-80F remote annunciators are compact, cost-effective LCD remote annunciators for use with & Fire-Lite® & fire alarm control panels (FACPs). & These annunciators display complete system point status information and include control switches for remote control of critical system functions. Up to 32 annunciators may be connected to the EIA-485 terminal port of each FACP. They require no programming, which saves time during system commissioning.
Features & Benefits:
– 80-character backlit LCD
– Mimics all display information from the host panel
– Control switches for system acknowledge, signal silence, drill, and reset with enable key
– System status LEDs for power, alarm, trouble, supervisory, and alarm silenced
– Displays device type identifiers, individual point alarm, trouble or supervisory, zone, and custom alpha labels
– Time and date display field
– May be powered from the host FACP or by the remote power supply (requires 24V DC)
– Up to 32 annunciators per FACP
– Plug-in terminal blocks for ease of installation and service
– Can be remotely located up to 6,000 ft (1828.8 m) from the FACP
Certifications:
– UL Listed: S232
– MEA Listed: 72-01-E
– CSFM: 7120-1574:179
– FM Approved
FPJ remote firefighter phone jacks provide a plug-in location for the firefighter handset (FHS-F) and can mount to a single-gang electrical box.
]]>FHS firefighter handsets are used to communicate over the telephone circuit and allow simultaneous operation of up to 10 firefighter remote handsets when connected to the firefighter telephone systems (NFC-FFT and ECC-FFT)
]]>BG-12 Series fire alarm pull stations are designed to meet multiple applications with the installer and end user in mind. They feature a variety of models including single- and dual-action versions.
These pull stations provide an alarm-initiating input signal to conventional fire alarm control panels (FACPs). Its innovative design, durable construction, and multiple mounting options make these pull stations simple to install, maintain, and operate. The cover, backplate, and operation handle of these pull stations are all molded of durable polycarbonate material.
Features & Benefits:
– Aesthetically pleasing, highly visible design and color
– Meets ADA & five lb maximum pull-force
– Easily operated (single- or dual-action, model dependent), yet designed to prevent false alarms when bumped, shaken, or jarred
– PUSH IN/PULL DOWN handle latches in the down position to clearly indicate the station has been operated
– The word ‘ACTIVATED’ appears on top of the handle in bright yellow, further indicating the operation of the station
– Operation handle features white arrows showing basic operation direction for non-English-speaking persons
– Braille text included on the finger-hold area of the operation handle and across the top of the handle.
– Multiple hexes- and key-lock models available
– US patented hex-lock needs only a quarter-turn to lock/unlock
– The station can be opened for inspection and maintenance without initiating an alarm
Certifications:
– UL Listed: S692
– ULC Listed: S692
– CSFM Approved: 7150-0028:199
– FM Approved
– MEA Approved: 67-02-E &
– Meets UL 38, Standard for Manually Actuated Signaling Boxes
– Patented: US Patent No. D428,351- 6,380,846- 6,314,772- 6,632,108
BG-12 Series fire alarm pull stations are designed to meet multiple applications with the installer and end user in mind. They feature a variety of models including single- and dual-action versions.
These pull stations provide an alarm-initiating input signal to conventional fire alarm control panels (FACPs). Its innovative design, durable construction, and multiple mounting options make these pull stations simple to install, maintain, and operate. The cover, backplate, and operation handle of these pull stations are all molded of durable polycarbonate material.
Features & Benefits:
– Aesthetically pleasing, highly visible design and color
– Meets ADA & five lb maximum pull-force
– Easily operated (single- or dual-action, model dependent), yet designed to prevent false alarms when bumped, shaken, or jarred
– PUSH IN/PULL DOWN handle latches in the down position to clearly indicate the station has been operated
– The word ‘ACTIVATED’ appears on top of the handle in bright yellow, further indicating the operation of the station
– Operation handle features white arrows showing basic operation direction for non-English-speaking persons
– Braille text included on the finger-hold area of the operation handle and across the top of the handle.
– Multiple hexes- and key-lock models available
– US patented hex-lock needs only a quarter-turn to lock/unlock
– The station can be opened for inspection and maintenance without initiating an alarm
Certifications:
– UL Listed: S692
– ULC Listed: S692
– CSFM Approved: 7150-0028:199
– FM Approved
– MEA Approved: 67-02-E &
– Meets UL 38, Standard for Manually Actuated Signaling Boxes
– Patented: US Patent No. D428,351- 6,380,846- 6,314,772- 6,632,108
The MMF-302 Interface Module is intended for use in addressable two-wire systems, where the individual address of each module is selected using the built-in rotary switches. This module allows addressable panels to interface and monitor two-wire conventional smoke detectors. It transmits the status (normal, open, or alarm) of one full zone of conventional detectors back to the control panel. All two-wire detectors being monitored must be UL-compatible with this module. The MMF-302 has a panel-controlled LED indicator and can be used to replace an M302 module in existing systems.
]]>The MMF-301 monitor module can be installed in a single gang junction box directly behind the monitored unit. Its small size and light weight allow it to be installed without rigid mounting. The MMF-301 is intended for use in intelligent, two-wire systems where the individual address of each module is selected using rotary switches. It provides a two-wire initiating circuit for normally open contact fire alarms and security devices. This module can be used to replace an M301 module in existing systems.
]]>SD365 Series intelligent plug-in smoke detectors are designed for both performance and aesthetics. A new modern, sleek, contemporary design and enhanced optical sensing chamber are engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. Exclusively for use with Fire-Lite’s addressable fire alarm control panels (FACPs), the point ID capability allows each detector’s address to be set with rotary, decimal address switches, providing exact detector location for emergency personnel to quickly locate a fire during its early stages, potentially saving precious rescue time while also reducing property damage. Two LEDs on each sensor light provide a local, visible sensor indication.
Features & Benefits:
– Two-wire SLC loop connection
– Stable communication technique with noise immunity
– Built-in tamper-resistant feature- functional test switch activated by external magnet-walk test with address display
– Removable cover and insect-resistant screen for simple field cleaning
– Factory preset at 1.5% nominal sensitivity for panel alarm threshold level
– LED blinks when the unit is polled (communicating with the fire panel) and latches in the alarm
– Low standby current
– Sealed against back pressure
– Designed & to mount directly on the surface or the electrical box
– Separate base with SEMS screws for wiring allows the interchange of photoelectric, ionization, and thermal sensors, optional relay, isolator, and sounder bases
Certifications:
– UL/ULC Listing: S1059
– FM Approved
– CSFM: 7272-0075:0502
CMF-300 addressable control modules provide Fire-Lite® alarms & intelligent control panels with a circuit for notification systems, such as horns and strobes. Addressability allows the CMF-300 addressable control modules & to be activated through panel programming, on a select (zone or area of coverage) basis. LiteSpeed
is a communication protocol developed by Fire-Lite engineering that greatly enhances the speed of communication between analog intelligent devices. Intelligent devices communicate in a grouped fashion. If one of the devices within the group has new information, the panel CPU stops the group poll and concentrates on single points. The net effect is a response speed greater than five times that of other designs.
Features & Benefits:
– Internal circuitry powered directly by a 2-wire SLC loop
– Integral LED blinks green each time it receives communication and turns red when activated
– High noise immunity (EMF/RFI)
– Wide viewing angle of the LED
– Faceplate is made of heat-resistant plastic
– SEMS screws with clamping plates for wiring ease
– Direct-dial entry of address: 1– 159 for MS-9600 series panels, 1 to 99 on MS-9200UDLS, and MS-9050UD
Certifications:
– UL: S2424
– ULC: CS3965
– FM Approved
– CSFM: 7300-0075:185
– MEA: 72-01-E
CMF-300 addressable control modules provide Fire-Lite® alarms & intelligent control panels with a circuit for notification systems, such as horns and strobes. Addressability allows the CMF-300 addressable control modules & to be activated through panel programming, on a select (zone or area of coverage) basis. LiteSpeed is a communication protocol developed by Fire-Lite engineering that greatly enhances the speed of communication between analog intelligent devices. Intelligent devices communicate in a grouped fashion. If one of the devices within the group has new information, the panel CPU stops the group poll and concentrates on single points. The net effect is a response speed greater than five times that of other designs.
Features & Benefits:
– Internal circuitry powered directly by a 2-wire SLC loop
– Integral LED blinks green each time it receives communication and turns red when activated
– High noise immunity (EMF/RFI)
– Wide viewing angle of the LED
– Faceplate is made of heat-resistant plastic
– SEMS screws with clamping plates for wiring ease
– Direct-dial entry of address: 1– 159 for MS-9600 series panels, 1 to 99 on MS-9200UDLS, and MS-9050UD
Certifications:
– UL: S2424
– ULC: CS3965
– FM Approved
– CSFM: 7300-0075:185
– MEA: 72-01-E