The System Sensor Strobes offers the most flexible and easy-to-use line of strobes in the industry for alarming individuals during fire emergencies. With white and red housing, a universal fire symbol and a ceiling mount accessory available these devices can meet virtually any application. They also mount to a wide variety of back box sizes to offer the most flexibility in installation. This line of Strobe devices features a wide variety of features that simplifies installations. The mounting plate allows the devices to be compatible with a wide range of back box sizes.
Features & Benefits:
– Mounting plate included for compatibility with a wide range of back box sizes
– Built-in synchronization feature keeps strobes in sync for up to 30 minutes
– Round trim ring available for ceiling mount applications
– Universal Fire symbol is language independent
Certifications:
– UL 1638 Listed
System Sensors Horn Strobes have been designed to provide a flexible and easy-to-use horn strobe used to produce a loud sound to notify occupants to evacuate the buildings during an emergency event. They have high and low-volume options for the horn as well as a continuous tone or temporal 3 output. The horn strobes are wired as primary-signaling notification appliances and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system.
Features & Benefits:
– Mounting plate included for compatibility with a wide range of back box sizes
– Horn settings on the horn strobe model are high and low volume, continuous or temporal 3 tone
– Universal Fire symbol is language independent
– Built-in synchronization feature keeps strobes in sync for up to 30 minutes
Certifications:
– UL 1638
– UL 464
The SpectrAlert® Advance series strobes are ideal for warning hearing-impaired individuals during an emergency event. They have field-selectable candela settings including 15, 15/75, 30, 75, 95, 110, and 115 candela. High candela models have field selectable settings that include 135, 150, 177, and 185 candela. They offer a plug-in design with minimal intrusion into the back box, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults.
Features & Benefits:
– Weatherproof per NEMA 4X, IP56
– Compatible with System Sensor synchronization protocol and legacy SpectrAlert products
– Field-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185
– Automatic selection of 12 or 24-volt operation at 15 and 15/75 candela
– Universal mounting plate with an onboard shorting spring that tests wiring continuity before devices are installed
– Plug-in design with minimal intrusion into the back box
Certifications:
– UL Listed: S3593
– ULC Listed
– CSFM: 7300-1653:187
– FM: 3023572
– MEA: MEA452-05-E
The SpectrAlert® Advance series strobes are ideal for warning hearing-impaired individuals during an emergency event. They have field-selectable candela settings including 15, 15/75, 30, 75, 95, 110, and 115 candela. High candela models have field selectable settings that include 135, 150, 177, and 185 candela. They offer a plug-in design with minimal intrusion into the back box, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults.
Features & Benefits:
– Weatherproof per NEMA 4X, IP56
– Compatible with System Sensor synchronization protocol and legacy SpectrAlert products
– Field-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185
– Automatic selection of 12 or 24-volt operation at 15 and 15/75 candela
– Universal mounting plate with an onboard shorting spring that tests wiring continuity before devices are installed
– Plug-in design with minimal intrusion into the back box
Certifications:
– UL Listed: S3593
– ULC Listed
– CSFM: 7300-1653:187
– FM: 3023572
– MEA: MEA452-05-E
The SpectrAlert® Advance series strobes are ideal for warning hearing-impaired individuals during an emergency event. They have field-selectable candela settings including 15, 15/75, 30, 75, 95, 110, and 115 candela. High candela models have field selectable settings that include 135, 150, 177, and 185 candela. They offer a plug-in design with minimal intrusion into the back box, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults.
Features & Benefits:
– Weatherproof per NEMA 4X, IP56
– Compatible with System Sensor synchronization protocol and legacy SpectrAlert products
– Field-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185
– Automatic selection of 12 or 24-volt operation at 15 and 15/75 candela
– Universal mounting plate with an onboard shorting spring that tests wiring continuity before devices are installed
– Plug-in design with minimal intrusion into the back box
Certifications:
– UL Listed: S3593
– ULC Listed
– CSFM: 7300-1653:187
– FM: 3023572
– MEA: MEA452-05-E
Features & Benefits:
– Plug-in design and protective cover reduce ground faults
Certifications:
– UL Listed S4048
– ULC Listed
– CSFM 7320-1653:0505
– FM 3057493
The SpectrAlert® Advance series of notification appliances offers a wide range of outdoor speakers for wall and ceiling applications. They are designed to be used at either 25 or 70.7 Volts and operate at any one of four input power levels. These products are electrically backward compatible with the previous generation of SpectrAlert® speakers. With its low total harmonic distortion, the SpectrAlert® Advance SP series offers high-fidelity sound output.
Features & Benefits:
– Weatherproof per NEMA 4X, IP56
– Rated from –40°F to 151°F
– Plug-in design and protective cover reduce ground faults
– Universal mounting plate with onboard shorting spring that tests wiring continuity before devices are installed
– Rotary switch for speaker voltage (25 and 70.7 Vrms) and power settings (1/4, 1/2, 1, and 2 watts)
– Compatible with System Sensor synchronization protocol and legacy SpectrAlert® products
– Tamper-resistant construction
Certifications:
– UL Listed 75S0
– ULC Listed
– CSFM Listing 7320-1653:201
– MEA Approved 10-08-E (SPWK)
L-Series speaker strobes reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress the wires, and confirm wiring continuity before plugging in the speakers. In addition, a protective plastic cover prevents nicked wires by covering exposed speaker components.
These devices also enable faster installations by providing instant feedback to ensure that wiring is properly connected, rotary switches to select voltage and power settings, and seven field-selectable candela settings for wall speaker strobes. The low total harmonic distortion of the speakers offers high-fidelity sound while still offering high-volume sound for use in high ambient noise applications.
Features & Benefits:
– Plug-in design and protective cover reduce ground faults
– Universal mounting plate with an onboard shorting spring tests wiring continuity before installation
– No extension ring is required
– Field-selectable candela settings for wall units: 15, 30, 75, 95, 110, 135 and 185
– Automatic selection of 12 or 24V operation at 15 and 30 candela
– Rotary switch simplifies field selection of speaker voltage (25 and 70.7Vrms) and power settings (1/4, 1/2, 1, and 2W)
– Speakers offer high fidelity and high-volume sound output
– 520 Hz +/- 10% square wave tone capable with compatible fire alarm control panel (FACP)
– Tamper-resistant construction
– Updated modern aesthetics
Certifications:
– UL Listed: S4048
– ULC Listed: S4048
– FM Approved
– CSFM: 7320-1653:0505
L-Series speaker strobes reduce costly ground faults using a plug-in design and universal mounting plate that allow the installer to pre-wire mounting plates, dress the wires, and confirm wiring continuity before plugging in the speakers. In addition, a protective plastic cover prevents nicked wires by covering exposed speaker components.
These devices also enable faster installations by providing instant feedback to ensure that wiring is properly connected, rotary switches to select voltage and power settings, and seven field-selectable candela settings for wall speaker strobes. The low total harmonic distortion of the speakers offers high-fidelity sound while still offering high-volume sound for use in high ambient noise applications.
Features & Benefits:
– Plug-in design and protective cover reduce ground faults
– Universal mounting plate with an onboard shorting spring tests wiring continuity before installation
– No extension ring is required
– Field-selectable candela settings for wall units: 15, 30, 75, 95, 110, 135 and 185
– Automatic selection of 12 or 24V operation at 15 and 30 candela
– Rotary switch simplifies field selection of speaker voltage (25 and 70.7Vrms) and power settings (1/4, 1/2, 1, and 2W)
– Speakers offer high fidelity and high-volume sound output
– 520 Hz +/- 10% square wave tone capable with compatible fire alarm control panel (FACP)
– Tamper-resistant construction
– Updated modern aesthetics
Certifications:
– UL Listed: S4048
– ULC Listed: S4048
– FM Approved
– CSFM: 7320-1653:0505
SpectrAlert® Advance speaker strobes can be used outdoors, in wet or dry applications, and provide reliable operation from −40 to 151 °F. They provide a broad frequency response range, low harmonic distortion, and maintain a high sound pressure level at all tap settings to provide an accurate and intelligible broadcast of evacuation messages.
These speaker strobes include a variety of features that increase application flexibility and simplify installation, such as field-selectable settings, including candela, speaker voltage, and power settings, and automatic selection of 12 or 24V operation enabling installers to easily adapt devices to meet requirements.
Features & Benefits:
– Weatherproof per NEMA 4X, IP56
– Rated from –40 to 151 °F
– Plug-in design reduces ground faults
– Universal mounting plate with onboard shorting spring that tests wiring continuity before devices are installed
– Field-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115- high candela models have settings: 135, 150, 177, and 185
– Automatic selection of 12 or 24V operation at 15 and 15/75 candela
– Rotary switch for speaker voltage (25 and 70.7Vrms) and power settings (1/4, 1/2, 1, and 2W)
– Tamper-resistant construction
Certifications:
– UL Listed: 75S0
– MEA Approved: 10-08-E
– CSFM: 7320-1653:201