Technical Features
• EN54-11 : 2001 + A1 : 2005
• CPD Certificate
• restorable version with breaking glass effect
• Operating test with key supplied
• Degree of protection IP 66
• Connection Type : 6 terminals ( 3 double terminals for derivation )
• Maximum contact current 3A
• Operating temperature -20 / + 65 ° C
• Humidity 95 % RH
• 87x87x23 mm
• Weight 320g
4 Zone Fire Alarm Control Panel Specification
1. It is modularized design, the panel can expend from 1 zone to 32 zones easily.
2. It has 2 level control mode by a lock
3. It has 24VDC and 5VDC power supply output.
4. It has FIRE and FAULT signal output.
5. It has 2 general sounders output.
6. Each zone has 1 circuit detectors input
7. Each zone can be disable by a button.
8. It has RESET button to reset the panel.
9. It has SILENCE button to stop BUZZER and SOUNDERS.
10. It has EVACUATE button to start a manual fire alarm immediately.
11. It has battery low protection function, when battery voltage lower than 21VDC
battery will be cut off automatically until the mains power is on.
12. It has an optional GSM module for fire alarm by SMS
Fire alarm internally by a 24V DC motor driven by the crankshaft and connecting rod bells, no relays work, work current, high reliability.
Fire alarm for supporting specific products and linkage fire alarm systems, when the system recognizes fire broke out by linkage control equipment to the scene.
]]>The AW-BK901 has four adjustable operational range of between 8 to 20, 40, 70 and 100 meters beside with three adjustable sensitivity setting ranges from 2.6dB to 4.8dB to meet the specific environmental requirement. The AW-BK901 works on the principle of reflective infrared beam obscuration. Used in conjunction with a reflector, it will notify the fire alarm panel when the infrared beam is obscured by smoke. Secure and quick communication through the onboard processor enables the detector to make its own decision and drift compensation resulting in greater automation.
The AW-BK901 is ideal for use high ceiling and wide areas such as warehouses, large storages, shopping malls, leisure centres, exhibition halls, hotel lobbies, printing houses, garment factories, museums and prisons, as well as places where slight smoke particles or corrosive gas exist.
Feature and Benefits:
1.Manufacture in compliance with EN54-12;
2.Hassle free alignment, built with digital guide display and laser beam pointing;
3.Employ single-ended design through reflective mirror;
4. Four ranges wide monitoring from 8-100 meters via encoder;
5. Three users programming sensitivity adjustment;
6. Built-in microprocessor;
7. Self-diagnosis function can monitor for internal faults
8. Automatic compensation for factors weakening received signals, such as dust contamination, positional movement and ageing of the transmitter;
9. Fire and Fault interfacing relays;
10. Attractive and pleasing appearance;
11. Real User friendly alignment method.
The AW-BK901 has four adjustable operational range of between 8 to 20, 40, 70 and 100 meters beside with three adjustable sensitivity setting ranges from 2.6dB to 4.8dB to meet the specific environmental requirement. The AW-BK901 works on the principle of reflective infrared beam obscuration. Used in conjunction with a reflector, it will notify the fire alarm panel when the infrared beam is obscured by smoke. Secure and quick communication through the onboard processor enables the detector to make its own decision and drift compensation resulting in greater automation.
The AW-BK901 is ideal for use high ceiling and wide areas such as warehouses, large storages, shopping malls, leisure centres, exhibition halls, hotel lobbies, printing houses, garment factories, museums and prisons, as well as places where slight smoke particles or corrosive gas exist.
Feature and Benefits:
1. Manufacture in compliance with EN54-12;
2. Hassle free alignment,built with digital guide display and laser beam pointing;
3. Employ single-ended design through reflective mirror;
4. Four ranges wide monitoring from 8-100 meters via encoder;
5. Three users programming sensitivity adjustment;
6. Built-in microprocessor;
7. Self-diagnosis function can monitor for internal faults;
8. Automatic compensation for factors weakening received signals, such as dust contamination, positional movement and ageing of the transmitter;
9. Fire and Fault interfacing relays;
10. Attractive and pleasing appearance;
11. Real User friendly alignment method.
Newest and reasonable structure design
Sensitive adjustment, accurate positioning
Good performance, easy to install
Built-in high-speed,low-power, high-performance 32-bit high-precision data processing chip;
Adopt fast response type ultraviolet optical sensor; The small fire can be detected earlier;
The detection distance is 35 meters (0.33m*0.33m*0.05m n-heptane fire)
The perfect algorithm best combines the flame detection and false alarm capabilities;
The detector is suitable for a variety of fuels;
Suitable for heavy industry applications;
Low maintenance cost, easy to upgrade and improve.