ThemmO-6SF connects to the signaling line circuits (SLC) of the Gamewell-FCI analog addressable series fire alarm control panels. Each of themmO-6SF supervised control circuits occupies its own address on the system’s SLC that allows each to be fully programmable in its control-by-event sequence of operation. The address of the first supervised output circuit is set with a pair of rotary dials. Each remaining circuit is automatically assigned to its own subsequent address. ThemmO6SF module includes an address disable jumper matrix that allows one, two, or three addresses to be turned off to free these addresses for other purposes. An additional jumper setting selects either Style Y or Style Z circuit configurations. A wide range of configurations is possible including 30V DC, audio input at 25 or 70.7 VRMS, 125V AC, etc. More than one circuit can share a power supply if the current capacity does not exceed the power supply’s output.

Features & Benefits:

– Terminal blocks can accommodate 12 to 18 AWG wire
– Contains external power monitoring
– Provides a flexible jumper configuration feature that allows up to three output circuit addresses to be disabled
– Accommodates multiple external power inputs
– Short circuit protection of external power supplies
– Sources providing AC, DC, or audio inputs
– Designed for use with Gamewell-FCI analog addressable series fire alarm control panels

Certifications:

– CSFM: 7300-1703:0124
– FM: 3023594
– ISO 9001 Certification
– MEA FDNY: 219-02-E Vol. IV
– UL: S1913

All modules feature a built-in short circuit isolator. Input channels are capable of both latched and analog supervision:

there are three separate latched states, normal, open circuit, and combined alarm/short. The analog supervision

continuously monitors the supervised circuit, returning a signal proportional to the circuit resistance

Features &- Benefits:
Operating Temperature Range -20o C to +60o C
Humidity 5 to 95% Relative Humidity (non-condensing)
IP Rating IP40 (IP44 in M200E–SMB)
Operating Voltage Range 15 to 32VDC
M210EA Maximum Standby Current 140µA at 24VDC, no communications
M220EA Maximum Standby Current 140µA at 24VDC, no communications
M221EA Maximum Standby Current 140µA at 24VDC, no
communications M221EA Output Rating 2A at 30VDC, resistive load
Certifications:
Intertek Approved – EN