The AOM-2RF Module is designed for installation in the signaling line circuit of any Gamewell-FCI analog addressable fire alarm control panel. The Gamewell-FCI Velociti® Series addressable output relay control module allows a Gamewell-FCI analog addressable fire alarm control panel to switch discrete relay contacts by code command. The relay provides two isolated sets of Form-C contacts that transfer simultaneously. Circuit connections to the relay contacts are not supervised by the module.
Features & Benefits:
– Provides visual rotary, decimal switch addressing (01-159)
– Includes a bi-color LED that flashes green whenever the module is addressed, and lights steady red upon activation
– Designed as a compact size to allow easy installation
Certifications:
– Listed under UL Standard 864
– UL: S1913
– FM: 3023594
– FDNY: COA-219-02-E Vol. VI
– CSFM: 7300-1703:0102
– ISO 9001 Certification
ANN-RLY relay modules provide 10 programmable Form C relays when used with compatible fire alarm control panels (FACPs). & These modules may be mounted inside the FACP main circuit board chassis or in the battery area of the enclosure using an optional mounting bracket. ANN-RLY modules and FACPs communicate over a 2-wire serial interface employing the ANN-Bus communication format. An additional two wires are used for 24V DC power. A single 4-conductor unshielded cable may be used for both power and data communications. Up to eight ANN-Bus devices may be connected to the ANN-Bus of each FACP.
Features & Benefits:
Minimal programming
– Provides 10 programmable Form C relays with functions including alarm, trouble, supervisory, AC Loss, water flow delay, input zones, and silenceable alarm
– May be powered by 24V DC from the host FACP or by the remote power supply
– Up to eight ANN-Bus devices may be connected to the ANN-Bus of each FACP
Certifications:
– Listed to UL Standard 864, 9th Edition
– UL: S2424
– ULC
– FM Approved
– Fire Dept. of New York: #COA 6177
– CSFM: 7120-0075:0222
– MEA: 333-07-E
ZXSe Programmable Output Relay Module consists of 4 relay outputs built on a single printed circuit board. Each output relay provides single pole double throw (SPDT) switching action for other locally powered equipment. It Requires a 24V DC supply and an RS485 card to be fitted in the control panel. This relay module is used in the Morley ZXSe panel range.
]]>