ASD-PL3 intelligent photoelectric smoke sensors are plug-in smoke sensors that combine a photoelectronic sensing chamber with addressable-analog communications. The sensors transmit an analog representation of smoke density over communication lines to control panels. Rotary dial switches are provided for setting the sensor’s address.

Features & Benefits:

– Modern profile for improved aesthetics
– Visual rotary, decimal switch addressing (01 to 159)
– Built-in functional test switch activated by an external magnet
– Dual bi-color LEDs flash green whenever the sensor is addressed and turn a steady red during an alarm
– Optional relay, isolator, or sounder bases
– Low standby current
– Analog addressable communication
– Stable communication technique with noise immunity
– Optional remote, single-gang LED indicator (RA100Z)
– Compatible with Gamewell-FCI® analog addressable panels

Certifications:

– UL 268
– UL268A
– NFPA

Velociti® Series PL2FR photoelectronic smoke sensors are analog addressable plug-in smoke sensors with integral communication that provide features that surpass conventional sensors. Sensitivity can be programmed in the control panel software and is continuously monitored and reported to the panel. Point ID capability allows each sensor’s address to be set, providing exact locations for selective maintenance when the chamber contamination reaches an unacceptable level. The Velocity Series uses a communication protocol that substantially increases the speed of communication between the sensors and certain Gamewell-FCI® analog addressable fire alarm controls. These devices operate in a grouped fashion. If one of the devices in the group has a status change, the panel’s microprocessor stops the group poll and concentrates on the single device. The net effect is a response speed up to five times greater than earlier designs.

Features & Benefits:

– Offers a sleek, low-profile design
– Includes visual rotary, decimal switch addressing (01 to 159)
– Has a built-in functional test switch activated by an external magnet
– Displays bi-color LEDs flash green whenever the sensor is addressed, and light steady red during an alarm*
– Supports a low standby current
– Includes an optional relay, isolator, or sounder bases
– Contains an optional remote, single-gang LED Indicator (RA100Z)
– Designed with an analog addressable communication
– Provides a stable communication technique with noise immunity
– Compatible with Gamewell-FCI analog addressable panels
– *Only the red LED is operative in panels that do not operate in Velocity mode

Certifications:

– UL Standard: 864 9th Edition
– UL: S1913FM: 3023594
– MEA FDNY: COA-219-02-E Vol. VI
– CSFM: 7272-1703-0121
– ISO 9001 Certification

The HML/PSE photoelectric detectors incorporate an Application Specific Integrated Circuit (ASIC). Combined with the latest state-of-the-art optical chamber the detector provides efficient and accurate detection of fires with a high level of resilience to non-fire environmental influences. It is backward compatible with the Series 100 detector bases, thus providing the capability to upgrade, extend and maintain existing Series 100 installations.

Features & Benefits:
– Low profile design, Low current draw
– Backward compatible with Series 100 detector range of bases
– Wide operating voltage 8 to 30V DC
– Bi-colour LED detector status indicator
– Automatic drift compensation
– Programmable sensitivity
– Advanced maintenance features via remote hand-held test unit

Features & Benefits:
– Accepts ECO1000 range of detectors
– Compatible with fire and security systems
– Tamper-resistant feature
– Detector removal detection (2-wire system)
– Remote LED option
– Extended warranty

System Sensor i3 series smoke detectors represent a significant advancement in conventional detection. The i3 family is founded on three principles: installation ease, intelligence, and instant inspection.

System Sensor i3 series smoke detectors represent a significant advancement in conventional detection. The i3 family is founded on three principles: installation ease, intelligence, and instant inspection.

System Sensor i3 series smoke detectors represent a significant advancement in conventional detection. The i3 family is founded on three principles: installation ease, intelligence, and instant inspection.

Features & Benefits:
– 85 dB sounder
– Form C relay
– Isolated thermal sensor
– Plug-in design (base included)
– In-line terminals
– Flexible mounting options
– Stop-Drop ’N Lock attachment to the base
– Removable cover and chamber
– Remote maintenance signaling
– Drift compensation and smoothing algorithms
– Simplified sensitivity measurement
– Dual-color LEDs

Certifications:
– UL
– FM
– CSFM

The System Sensor low profile photoelectronic smoke detector is specifically designed to meet the performance requirements of the fire detection/alarm systems. The detector uses a state-of-the-art optical sensing chamber and is designed so that if the LED fails, it will not cause an alarm. The detector is designed to provide open area detection, and when installed in a two-wire base, is compatible with the Gamewell-FCI fire alarm control panels. The detector’s operation and sensitivity can be tested in place. The 2151 detector is designed with plug-in construction and plugs into the same base as the 1151 ionization smoke detector, making both models interchangeable. Bases are available for the following types of operation.

Features & Benefits:
– Built with a low-profile construction.
– Offers an easy plug-in of the head-to-base.
– Designed with a tamper-resistant feature.
– Includes a Test Switch.
– Shows a 360° view angle of the alarm LEDs.
– 0 Compatible with Gamewell-FCI control panels.
– Uses an audible sounder base (optional).
– Supports the field metering of detector sensitivity.
– Provides a removable insect screen and cover for field cleaning.
– Has an insect-resistant screening (020″”/.508 mm openings).

The System Sensor low profile photoelectronic smoke detector is specifically designed to meet the performance requirements of the fire detection/alarm systems. The detector uses a state-of-the-art optical sensing chamber and is designed so that if the LED fails, it will not cause an alarm. The detector is designed to provide open area detection, and when installed in a two-wire base, is compatible with the Gamewell-FCI fire alarm control panels. The detector’s operation and sensitivity can be tested in place. The 2151 detector is designed with plug-in construction and plugs into the same base as the 1151 ionization smoke detector, making both models interchangeable. Bases are available for the following types of operation.

Features & Benefits:
– Built with a low-profile construction.
– Offers an easy plug-in of the head-to-base.
– Designed with a tamper-resistant feature.
– Includes a Test Switch.
– Shows a 360° view angle of the alarm LEDs.
– 0 Compatible with Gamewell-FCI control panels.
– Uses an audible sounder base (optional).
– Supports the field metering of detector sensitivity.
– Provides a removable insect screen and cover for field cleaning.
– Has an insect-resistant screening (020″/.508 mm openings).